ConoGlaze™ General Purpose 201

Product families

Other characteristics

Brand

ConoGlaze

Features

Acid Resistant, Chemical Resistant, Corrosion Resistant, Easy To Finish, Excellent Food Resistance, General Purpose

Product Type

2K (2 component) Coating, Epoxy Coating, Sealer, Top Coat; 2K (2 component) Coating; Epoxy Coating; Sealer; Top Coat

Application Method

Roller, Spray

Compatible Substrates & Surfaces

Concrete, Metal

Markets

Paints & Coatings

Clean Up

All equipment should be cleaned with MEK or N-methyl pyrol before material cures.

Coverage

Coverage is theoretical and will vary depending upon surface conditions, porosity, application techniques and specific project conditions.

Shelf LIfe

ConoGlaze, ConoWeld and PenePrime have a shelf life of one year. Hi-Temp Primer/Zinc Filler has a shelf life of six months. Store in unopened, tightly sealed containers in a dry location at 70°F. Avoid freezing. If there is doubt as to the quality of the materials, consult a Sauereisen representative.

Application

Primer - Primers are supplied in premeasured containers. Remix individual containers before using.; Packaging of Primers No. 500 and 501 consists of Hardener Part A and Resin Part B which must be mixed together. Completely empty contents of Hardener Part A into Resin Part B container. Using a slow speed 1/2 inch drill motor with a "Jiffy" type blade, mix thoroughly until blended for three minutes. Primer is ready for use immediately after mixing.; Primer No. 560 is a single-component urethane. Ferrous substrates require the addition of Zinc Filler No. 561.; ConoGlaze - Packaging consists of premeasured unitized containers of Hardener Part A and Resin Part B. Remix Part A and B before combining. Completely empty contents of Hardener Part A into Resin Part B. Using a slow speed 1/2 inch drill motor affixed with a "Jiffy" type blade, mix three to five minutes until thoroughly blended.; Mix only complete batches. Material which has begun to set must be discarded. Do not add any solvent, additive, or adulterant to any component or mixed material.

Show in full

Cure

Heat Cure

Technology

Ready-to-Use Products

Packaging Type

• Cans
• Pails

Setting/Curing

Do not allow water or chemicals on the material surface for a minimum of 24 hours. For harsh chemical or physical environments, cure a minimum of 72 hours prior to exposure.

Characteristic

Excellent resistance to food acids and by-products.; Authorized by USDA for use in federally inspected meat and poultry plants.; Easy to clean surface.; Colors: 25 beige, 50 light gray, 53 gray, 63 tile red and 99 white.