SAUEREISEN ConoWeld 501
SAUEREISEN ConoWeld 501 is a primer to be used in conjunction with the Sauereisen line of epoxy coatings, linings and flooring materials. ConoWeld No. 501 is applied by spray, brush or roller over concrete and steel. This primer is an integral part of the Sauereisen lining system in that it seals porous substrates and promotes adhesion of the specified protective material. Easy application properties help to reduce total downtime.
Product families
- Concrete Coatings & Stains
Other characteristics
- Features
Corrosion Resistant, Excellent Seal Properties, Excellent Substrate Adhesion, Odorless
- Product Type
- 2K (2 component) Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Paints & Coatings
- Clean Up
All equipment should be cleaned with MEK before material cures. If removal is required after cure, consult Sauereisen for recommendations.
- Shelf LIfe
ConoWeld Liquid and Hardener components have a shelf life of one (1) year when stored in unopened, tightly sealed containers in a dry location at 70°F. If there is a doubt as to the quality of the materials, consult a Sauereisen representative.
- Application
ConoWeld primer is packaged in premeasured containers consisting of Hardener Part A and Resin Part B which must be mixed together before use. Remix the Part A and Part B before combining.. Completely empty contents of Hardener Part A into Resin Part B container. Using a slow speed 1/2 inch drill motor with a "Jiffy" type blade mix thoroughly until blended for 3 minutes. Primer is ready for use immediately after mixing.
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Cans
- Pails
- Characteristic
Seals porous substrates and promotes adhesion of topcoats.; Easy to apply - brush, roll, or spray.; No noxious or toxic odors during application.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Time (Working Time, 70°F) | 20.0 | minutes | ASTM C-308 modified |
| Application Time (Initial Set, 70°F) | 6.0 | hours | — |
| Bond Strength to Concrete | Concrete Failure | — | ASTM D-4541 |
| Components | 2 parts | — | — |
| Percent Solids | 100.0 | % | — |
| Thickness | 5 - 10 | mils | — |
