Creative Materials 102-32G1
- Chemical Family
- Silicones
102-32G1 is a flexible electrically conductive silicone adhesive. 102-32G1 features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of theproduct. Some applications for 102-32G1 include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32G1 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces. 102-32G1 features better conductivity than 102-32 when cured at lower temperatures
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Electronics
- Adhesives & Sealants
- Semiconductor Manufacturing
Product Families
- Conductive Adhesives
Other characteristics
- Product Type
- Conductive Adhesive
- Application Area
- Electrical Components
- Compatible Substrates & Surfaces
- Polytetrafluoroethylene, Silicone
- Markets
- Consumer Goods
- Electrical & Electronics
- Storage
- Shelf life
- 3 months at 25°C; or 6 months at -10°C; or 12 months at -40°C.
- NOTE
- Use catalyzed product within 24 - 36 hours.
- *102-32G1 packaged in syringes must be kept frozen at -40°C
- Properties
- Solderable - After plating
- Shelf LIfe
12 months at -40°C, 3 months at 25°C, 6 months at -10°C
- Technology
- Ready-to-Use Products
- Safety and Handling
Contains flammable solvents. Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Suggested Handling and Curing
102-32G1 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. For best mechanical properties heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. See typical cured properties table for lower temperature cure profiles. Add 0.25 - 0.5% by weight B-507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 25°C to 200°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Flexible
- Good Mechanical Properties
- Good Thermal Stability
- Heat Aging Resistant
- Shock Resistant
- Thermal Cycle Resistance
- Compatible Substrates and Surfaces
- Polytetrafluoroethylene
- Silicone
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (#CP-51, 1O/s) | 25,000 - 35,000 | cps |
| Thixotropic Index (1/10) | 3 | — |
| Filler | Silver | — |
| Percent Silver (cured) | 84 | — |
| Percent Solids | 84 - 89 | — |
| Volume Resistance (80°C cure) | max. 0.0001 | Q-cm |
| Volume Resistance (140°C cure) | max. 0.00008 | Q-cm |
| Thermal Conductivity | 12.7 | W/m-K |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
