Creative Materials 125-10ADP
- Chemical Family
- Silver & Silver Compounds
125-10ADP electrically conductive ink and coating suitable for application by screen printing and syringe dispensing. This product features excellent adhesion to Kapton, treated and untreated Mylar, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 125-10ADP include, but are not limited to, EMI/RFI shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. For some applications, 125-10ADP can be used as a lower cost alternative to some of our standard conductive inks and is a harder version of 125-10AD.
Properties
- Physical Form
- Paste
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Adhesion, Good Scratch Resistance, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Injection, Screen Coating
- Compatible Substrates & Surfaces
- Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Properties
- Solderable - No
- Shelf LIfe
- 6 months at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
125-10ADP is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 102-03 or 127-17. Prior to using, be certain to resuspend fillers. Best properties, for most applications, result when cured for several minutes at 100°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Adhesion
- Good Scratch Resistance
- Good Thermal Stability
- Compatible Substrates and Surfaces
- Plastics
- Polyimide
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.015 | ohms/sq/mil |
Table 2 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 21500 | cps |
| Percent Filler (cured) | min. 87 | — |
| Volume Resistivity | max. 0.00003 | Ω - cm |
| Sheet Resistivity | max. 0.015 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 180 | ºC |
| Thermal Stability | Good to 230 | °C |
| Theoretical Wet Coverage | 24.9 | in2/gm/mil |
| Specific Gravity | 2.45 | — |
