Creative Materials 122-44
- Chemical Family
- Silicones
122-44 is a silicone, pressure sensitive, screen-printable anisotropic conductive adhesive. The overall balance of peel strength, cohesion, lap shear strength, high temperature holding power, and conductivity provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. 122-44 is designed for bonding rubber to a variety of substrates such as aluminum, stainless steel, and steel. Peel strength develops rapidly and continues to increase for approximately one week.\nFeatures\nSilicone, pressure sensitive adhesive
Properties
- Physical Form
- Liquid
Product families
- Conductive Adhesives
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Product Type
- Conductive Adhesive, Pressure Sensitive Adhesive
- Conductive Adhesive
- Pressure Sensitive Adhesive
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
Aluminum, Elastomers & Rubbers, Metal, Stainless Steel, Steel
- Shelf Life
2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Consistency
- Medium viscosity liquid
- Technology
- Ready-to-Use Products
- Safety and Handling
Contains flammable solvents.; Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Handling
122-44 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 113-12 thinner. Apply thin film of adhesive to one or both surfaces to be bonded. Dry at room temperature for approximately 10 to 20 minutes. At this point, the surfaces should be pressed firmly together. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 55°C to 180°C. Alternately, the assembled part can be cured at room temperature, allowing 1 week to develop full strength. End user is advised to experimentally determine temperature and time best suited for individual applications. (See back of sheet for stepby-step directions.)
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Anisotropic
- Creasing Resistance
- Excellent Substrate Adhesion
- Flexing Resistance
- Good Peeling Strength
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Stainless Steel
- Steel
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Minimum Cure Temperature | 50 | °C |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Resistivity (X and Y Axis) | 1x10^12 | Ω - cm |
| Volume Resistivity (Z Axis) | 0.0001 | Ω - cm |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
| Peel Strength | 9 - 11 | lbs./inch |
