Creative Materials 119-07
- Chemical Family
- Epoxy & Epoxy Derivatives
119-07 is a black, pad-printable, one component, high dielectric strength, epoxy ink and coating. This product features excellent adhesion to Kapton, Mylar, aluminum, FR-4 boards, glass and a variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to abrasion, scratching, and thermal aging. Applications for 119-07 include, but are not limited to, high dielectric strength coatings for electrical and electronic devices. 119-07 is designed for pad printing onto contoured surfaces.\nFeatures\nHigh dielectric strength coating/ink
Product families
- Functional Inks & Pastes
Other characteristics
- Color
- Black
- Features
Abrasion Resistant, Excellent Dielectric Properties, Excellent Substrate Adhesion, Good Scratch Resistance, Good Thermal Stability
- Application Area
- Electrical Components
- Application Method
- Pad Printing
- Compatible Substrates & Surfaces
- Aluminum, Glass, Metal, Plastics, Polyimide
- Shelf LIfe
- 2 months at 25°C, 6 months at -10°C.
- Product Type
- Dielectric Paste & Ink
- Epoxy Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Pad Printing
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
119-07 is ready to use as supplied. Prior to using, be certain to re-suspend filler. Further thinning may be accomplished by adding small amounts of CMI Thinner # 113- 39. Best properties, for most applications, result when cured for 1 hour at 125°C, or 30 minutes at 150°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 125°C to 185°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Abrasion Resistant
- Excellent Dielectric Properties
- Excellent Substrate Adhesion
- Good Scratch Resistance
- Good Thermal Stability
- Compatible Substrates and Surfaces
- Aluminum
- Glass
- Metal
- Plastics
- Polyimide
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 10,000 - 12,000 | cps |
| Dielectric Strength | 2500 | Volts/0.001" |
| Dielectric Constant (at 100 Hz) | 4 | — |
| Volume Resistivity | 1x 10^16 | ohm-cm |
| Pencil Hardness | min. 6h | — |
| Glass Transition Temperature | 160 | °C |
| Hydrolytic Stability | Excellent | — |
