Creative Materials 125-19(SP)A/B
- Chemical Family
- Silicones
125-19(SP)A/B is a highly elastomeric, electrically conductive, silicone-based ink. This product features a high performance design useful in a wide range of printing and coating applications and features excellent bonding to most metal and plastic substrates. This product is very resistant to flexing and creasing and is ideal for applications that include, but are not limited to, wearable electronics, high temperature bonding, and stretchable, elastomeric conductors. 125-19(SP)A/B is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.\nFeatures
Product families
Applications
- Electronics Coatings
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Electrically Conductive, Excellent Printability, Flexible, Flexing Resistance, Good Bonding Strength, Good Coating Performance, High Temperature Performance, Long Potlife
- Application Area
Conductors, Electrical Components, Stretchable Electronics; Conductors; Electrical Components; Stretchable Electronics
- Application Method
- Injection, Screen Coating
- Compatible Substrates & Surfaces
- Metal, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Shelf LIfe
- 12 months at 25˚C
- Product Type
- 2K (2 Component) Ink
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Injection
- Screen Coating
- Mixing Instructions
Premix each part in original containers prior to mixing them together by hand until the combination is uniform.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Suggested Handling and Curing
125-19(SP)A/B is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 127-05 or Xylene. Prior to using, be certain to re-suspend silver. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 125-19(SP)A/B is not recommended for applications that cannot cure below 150°C.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Excellent Printability
- Flexible
- Flexing Resistance
- Good Bonding Strength
- Good Coating Performance
- High Temperature Performance
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Polyimide
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0 | Ω/sq/mil |
| Viscosity | 40000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 66 | — |
| Specific Gravity (water = 1) | 2.4 | — |
| Volume Resistance | max. 0.0003 | Ω-cm |
| Sheet Resistance | max. 0.1 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -60 to 280 | ºC |
| Thermal Stability | Good to +360 | °C |
