Creative Materials 102-32D
- Chemical Family
- Silicones
102-32D is a flexible, electrically conductive, silicone-based ink and adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32D include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32D is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.\nFeatures
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Electronics
- Adhesives & Sealants
Product Families
- Conductive Adhesives
- Functional Inks & Pastes
Other characteristics
- Product Type
- Conductive Adhesive, Conductive Paste & Ink
- Conductive Adhesive
- Conductive Paste & Ink
- Application Area
- Electrical Components
- Markets
- Consumer Goods
- Electrical & Electronics
- Properties
- Solderable - No
- Consistency - Smooth Paste
- Shelf LIfe
- 12 months at -10°C.
- Technology
- Ready-to-Use Products
- Safety and Handling
Contains flammable solvents. Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
102-32D is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI #125- 07 thinner. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. Heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Flexible
- Flexing Resistance
- Good Bonding Strength
- Good Peeling Strength
- High Temperature Performance
- High Temperature Resistance
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Filler | Silver | — |
| Percent Silver (cured) | 78 | — |
| Specific Gravity (water = 1) | 2.4 | — |
| Volume Resistance | 0.0001 | Q-cm |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
| Thermal Conductivity | 12.07 | W/m-K |
