Creative Materials 128-15
128-15 is a flexo-printable, UV curable, flexible, ultraviolet-cured pressure sensitive adhesive. This material can be used on a variety of substrates including but not limited to polycarbonate, treated and untreated polyesters, Kapton, epoxy/glass PC boards, glass, stainless steel, aluminum, and copper. The possible applications for 128-15 include electronic circuitry, nameplates, and lamination.\nFeatures\nHigh peel strength\nFast UV cure, no VOC
Product families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Features
Fast Cure, Flexible, Good Peeling Strength, Heat Stabilized, High Speed Printing, Low Modulus, UV Curable
- Product Type
- Pressure Sensitive Adhesive
- Application Area
- Electrical Components
- Application Method
- Flexography
- Compatible Substrates & Surfaces
Aluminum, Copper, Fibers & Fabrics, Glass, Metal, Plastics, Polyimide, Stainless Steel
- Shelf Life
- 12 months (at 25°C), 12 months at 25°C
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Flexography
- Suggested Handling and Curing
Material is ready to use as received. Cure using a 200 – 300 watt/inch mercury vapor lamp. Speed of cure will vary depending upon available energy. Typical cure time ranges from a few seconds to 1 minute when work is positioned 6 – 10 inches from lamp. Faster curing can be accomplished by moving lamp closer to work or increasing lamp intensity. When applying two layers, it is sometimes desirable to under cure the first layer so as to improve interlayer adhesion. End user is advised to experiment with intensity, speed, and distance for optimal properties.
- Ready to Use Product Features
- Fast Cure
- Flexible
- Good Peeling Strength
- Heat Stabilized
- High Speed Printing
- Low Modulus
- UV Curable
- Compatible Substrates and Surfaces
- Aluminum
- Copper
- Fibers & Fabrics
- Glass
- Metal
- Plastics
- Polyimide
- Stainless Steel
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | approx. 8,500 | cps |
| Volume Resistivity | 1x 10^12 | Ω - cm |
| Solid Content | 100 | % |
| Peel Strength | 3 - 5 | Ib./in |
| Shear Strength | min. 5 | — |
| Specific Gravity | 1.13 | — |
