Creative Materials 124-33-F
124-33-F is an electrically conductive, transferable, thermoplastic adhesive film. Some applications for the 125-33- F series include, but are not limited to, conductive splicing of ribbon cables, PTF circuits, and electrical attachment of SMD devices, as well as the assembly of electrical and electronic components. This system features excellent thermal stability and high temperature properties. This product has been formulated to have improved handleability. This product is available in thicknesses from 1 to 5 mils.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Electronics
- Adhesives & Sealants
- Conduits & Cable Management
- Printed Circuit Boards (PCBs)
Product Families
- Conductive Adhesives
Other characteristics
- Product Type
- Conductive Adhesive
- Application Area
Electrical Components, PTF Circuits, Ribbon Cables; Electrical Components; PTF Circuits; Ribbon Cables
- Markets
- Consumer Goods
- Electrical & Electronics
- Properties
- Solderable - No
- Shelf LIfe
- 12 Months
- Technology
- Ready-to-Use Products
- Application Procedure
1. As with all adhesive bonds, surface preparation is a vital part of the process. Carefully clean both surfaces to be bonded with MEK if possible. If MEK is not compatible with the surfaces to be bonded, another suitable solvent may be used. 2. Allow cleaned surfaces to dry completely. 3. Die cut 124-33-F to the of the size of interface area, remove one of the protective liners, position onto one of the surfaces to be bonded, and warm the substrate/adhesive to 125°C or more. 4. By applying pressure, laminate the film/adhesive to the substrate smoothing out any trapped air. Allow to cool to room temperature and peel off the other release liner. 5. Position the other substrate and apply a clamp to provide constant pressure. 6. Cure for 10 minutes at 170°C. 7. Remove pressure. Part is ready for use.
- General Description
Substrate Type: PET Release Liner Conductive Coating Type: Silver/Polymer; Adhesive Thickness (mils)
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Ease of Handling
- Electrically Conductive
- Good Thermal Stability
- High Temperature Performance
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Useful Temperature Range | -55 to 200 | ºC |
| Volume Resistivity | 0.0005 | Ω cm |
| Glass Transition Temperature | 100 | °C |
| Lap Shear Strength | min. 250 | Psi |
