Creative Materials 129-03
129-03 is a UV B-staging, thermal final curing, flexible adhesive. This material exhibits pressure sensitive adhesive qualities upon UV exposure followed by increased adhesive strength post thermal curing. This material can be used on a variety of substrates including but not limited to polycarbonate, treated and untreated polyesters, epoxy/glass PC boards, glass, and stainless steel.\nFeatures\nHigh peel strength\nFast UV B-stage
Product families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Features
Flexible, Good Peeling Strength, Heat Stabilized, High Modulus
- Product Type
- Pressure Sensitive Adhesive
- Compatible Substrates & Surfaces
- Glass, Metal, Stainless Steel
- Shelf Life
1 month (at 25°C), 1 month at 25°C, 6 months at -10°C
- Cure
- Heat Cure
- Radiation Cure
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Suggested Handling and Curing
129-03 is ready to use as received. B-stage using a 200-300 watt/inch mercury vapor lamp. Speed of B-stage will vary depending upon available energy. Typical cure time ranges from a few seconds to 1 minute when work is positioned 6-10 inches from lamp. Material should be highly tacky post UV exposure. Good final properties are exhibited when by thermally curing at 125°C for 15 minutes. 129-03 is not recommended for applications that cannot cure above 115°C.
- Ready to Use Product Features
- Flexible
- Good Peeling Strength
- Heat Stabilized
- High Modulus
- Compatible Substrates and Surfaces
- Glass
- Metal
- Stainless Steel
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 4000 | cps |
| Peel Strength | 3 - 5 | Ib./in |
| Specific Gravity | 1.08 | — |
| Coverage (at 1 mil) | 56 | in^2/g |
