Creative Materials 120-07LPS
120-07(LPS) is a screen-printable, electrically conductive ink, coating and adhesive suitable for application by stamping, screen-printing, dipping and syringe dispensing. This product features excellent adhesion to Kynar, Kapton, Mylar, polycarbonate, glass and can also be used on low surface energy coatings such as transparent conductive oxides. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 120-07(LPS) include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. 120-07(LPS) is a cross-linking version of 120-07(LP) and a more flexible version of 120-07T.
Product families
Applications
- Textile Manufacturing
- Electronics Coatings
- Screen Printing
Product Families
- Screen Printing Inks
Other characteristics
- Features
Creasing Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Excellent Substrate Adhesion, Flexing Resistance
- Application Area
Electrical Components, Flexible Circuits, Membrane Touch Switch; Electrical Components; Flexible Circuits; Membrane Touch Switch
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
- 2 months at 25˚C, 6 months at -10°C,
- Product Type
- Conductive Paste & Ink
- Screen Printing Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
120-07(LPS) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 124-13. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for a few minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Excellent Substrate Adhesion
- Flexing Resistance
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.015 | Ω/sq/mil |
Table 2 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 22,000 - 28,000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 88 | — |
| Volume Resistance | max. 0.000045 | Ω-cm |
| Sheet Resistivity | 0.015 | Ω/sq./mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
