Creative Materials Inc. 124-18(LPS)
124-18(LPS) is a matte finish, flexible, electrically insulating ink and coating suitable for application by screen printing, dipping, and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional insulating materials, this product is very resistant to flexing and creasing. Some applications for 124-18(LPS) include, but are not limited to, insulating polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 124-18(LPS) is a crosslinking version of 124-18(LP).\nFeatures\nTranslucent white, adheres ITO or and polycarbonate
Product families
Applications
- Electronics Coatings
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Electrically Insulating, Excellent Substrate Adhesion, Flexible, Flexing Resistance, Matte Finish
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Shelf LIfe
- 6 months at 21°C
- Product Type
- Dielectric Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
124-18(LPS) is ready to use as supplied. Stir gently before using. Further thinning may be accomplished by adding small amounts of thinner 112-19. Best properties for most applications result when cured for one hour at 125°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 110°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Insulating
- Excellent Substrate Adhesion
- Flexible
- Flexing Resistance
- Matte Finish
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 10,000 - 15,000 | cps |
| Volume Resistivity | 1x 10^11 | ohm-cm |
| Tear Resistance | min. 300 | lbs/in. |
| Glass Transition Temperature | 26 | °C |
