Creative Materials 105-48
- Chemical Family
- Silicones
105-48 is a flexible, semi-conductive, silicone, pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 105-48 include, but are not limited to, electrostatic discharge, polymer thick film circuitry and membrane switches.\nFeatures\nSemi-conductive pressure-sensitive adhesive
Properties
- Physical Form
- Liquid
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Adhesives & Sealants
- Printed Circuit Boards (PCBs)
- Switches & Relays
Product Families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Features
Creasing Resistance, Flexible, Flexing Resistance, Good Peeling Strength, High Cohesion, High Hydrolytic Stability, High Temperature Performance, Highly Versatile, Improved Shear Stability, Semi Conductive
- Product Type
- Pressure Sensitive Adhesive
- Application Area
- Flexible Circuits, Membrane Touch Switch
- Flexible Circuits
- Membrane Touch Switch
- Markets
- Consumer Goods
- Electrical & Electronics
- Technology
- Ready-to-Use Products
- Safety and Handling
Contains flammable solvents.; Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Syringe dispense
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
105-48 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of xylene. Prior to using, be certain to re-suspend fillers. Apply thin film of adhesive to both surfaces to be bonded. Allow solvent to evaporate completely at room or at slightly elevated temperature. Assemble parts, applying slight pressure to assure good mating of surfaces and formation of filet. No further curing is necessary; however best properties, for most applications, result when cured for 1 minute at 160°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Flexible
- Flexing Resistance
- Good Peeling Strength
- High Cohesion
- High Hydrolytic Stability
- High Temperature Performance
- Highly Versatile
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Filler | Carbon Blends | — |
| Volume Resistance | max. 1x 10^4 | Ω-cm |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
