Creative Materials 127-41-25
- Chemical Family
- Acrylics & Acrylates
127-41-25 is a screen printable, UV curable, flexible, ultraviolet-cured anisotropic conductive pressure sensitive adhesive. This material can be used on a variety of substrates including but not limited to polycarbonate, treated and untreated polyesters, Kapton, epoxy/glass PC boards, glass, stainless steel, aluminum, and copper. The possible applications for 127-41-25 include electronic circuitry, conductive splicing of ribbon cables, PTF circuits, and electrical attachment of surface mounted devices. 127-41-25 is optimized for a 0.001†bondline.\nFeatures\nUV curable pressure sensitive adhesive, ideal for 25µm bond line
Properties
- Physical Form
- Liquid
Product families
- Conductive Adhesives
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Cure Method
- Radiation Cure
- Product Type
- Conductive Adhesive, Pressure Sensitive Adhesive
- Conductive Adhesive
- Pressure Sensitive Adhesive
- Application Area
- Electrical Components
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
Aluminum, Copper, Glass, Metal, Plastics, Polyimide, Stainless Steel
- Advantages
- High peel strength
- Fast UV cure, no VOC
- Heat and humidity stable
- Shelf LIfe
- 12 months at -10°C, 12 months at 25°C
- Cure
- Radiation Cure
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
Material is ready to use as received. Cure using a 200-300 watt/inch mercury vapor lamp. Speed of cure will vary depending upon available energy. Typical cure time ranges from a few seconds to 1 minute when work is positioned 6-10 inches from lamp. Faster curing can be accomplished by moving lamp closer to work or increasing lamp intensity. End user is advised to experiment with intensity, speed, and distance for optimal properties.
- Ready to Use Product Features
- Anisotropic
- Flexible
- Good Peeling Strength
- Heat Stabilized
- UV Curable
- Compatible Substrates and Surfaces
- Aluminum
- Copper
- Glass
- Metal
- Plastics
- Polyimide
- Stainless Steel
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Minimum Cure Temperature | UV | — |
| Volume Resistivity (X and Y Axis) | 1x 10^12 | Ω - cm |
| Volume Resistivity (Z Axis) | 0.0001 | Ω - cm |
| Solid Content | 100 | % |
| Peel Strength | 3 - 5 | Ib./in |
| Shear Strength | min. 5 | min/lb |
| Specific Gravity | 0.9 - 1.1 | — |
| Coverage (at 1 mil) | 54 | in^2/Ig |
