Creative Materials 110-19(UT)
- Chemical Family
- Silver & Silver Compounds
110-19UT is an electrically conductive ink and adhesive suitable for application by screen printing, dipping and syringe dispensing and designed with high temperature applications in mind. Unlike conventional conductive materials, his product features a unique high continuous operation temperature and very high glass transition temperature making it especially well-suited for extreme conditions found in furnace, heater, and aerospace applications. This product features excellent adhesion to a wide range of substrates such as Kapton, Mylar, ITO sputtered surfaces, glass and a variety of other surfaces without the addition of treatment via acid or plasma etch. This product is very resistant to flexing and creasing and is suitable for very fine lines and spaces. Some applications for 110-19UT include, but are not limited to, EMI/RFI shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches.
Product families
Applications
- Textile Manufacturing
- Screen Printing
- Aerospace & Aviation
Product Families
- Functional Inks & Pastes
Other characteristics
- Color
- Silver
- Features
Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Paint Adhesion, Good Thermal Stability, High Glass Transition Temperature, High Hydrolytic Stability, High Temperature Performance, Radio Frequency Shielding (RFI)
- Application Area
Aerospace Leading Edge, Circuit Substrates, Furnace, Membrane Touch Switch; Aerospace Leading Edge; Circuit Substrates; Furnace; Membrane Touch Switch
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Automotive & Transportation
- Industrial
- Printing & Packaging
- Properties
- Solderable - No
- Shelf LIfe
6 months at 5°C, 1 month at 25°C, 12 months at -10°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Suggested Handling and Curing
110-19UT is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03. Prior to using, be certain to resuspend silver. Best properties for most applications result when pre-curing for half an hour at 150°C followed by curing for 60 minutes at 250°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 180°C to 250°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Paint Adhesion
- Good Thermal Stability
- High Glass Transition Temperature
- High Hydrolytic Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.04 | ohms/sq/mil |
Table 2 of 2
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 30,000 - 40,000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 90 | — |
| Volume Resistivity | 8.0e-05 | Q-cm |
| Sheet Resistivity | 0.03 | Q/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 350 | ºC |
| Thermal Stability | Good to 410 | °C |
| Wet Coverage | 19.5 | inlgm/mil |
| Specific Gravity | 3.1 | — |
