Creative Materials 125-10
- Chemical Family
- Silver & Silver Compounds
125-10 electrically conductive ink and coating suitable for application by screen printing and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 125-10 include, but are not limited to, EMI/RFI shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. For some applications, 125-10 can be used as a lower cost alternative to some of our standard conductive inks.\nFeatures
Properties
- Physical Form
- Paste
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Color
- Silver
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
12 months at -10°C., 6 months at 25°C, 9 months at 5°C
- Consistency
- Smooth Paste
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
125-10 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 102-03. When working with polycarbonate thin with 120-08. Prior to using, be certain to re-suspend fillers. Best properties, for most applications, result when cured for several minutes at 170°C to 180°C. Good properties are obtained on a variety of substrates by drying and curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.015 | ohms/sq/mil |
Table 2 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Percent Filler (cured) | 88 | — |
| Volume Resistivity | 4.0e-05 | Ω - cm |
| Sheet Resistivity | max. 0.015 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 325 | °C |
| Theoretical Wet Coverage | 29* | in2/gm/mil |
| Specific Gravity | 2.07 | — |
