Creative Materials 124-36
- Chemical Family
- Silver & Silver Compounds
124-36 is a medical grade, electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some uses for 124-36 include, but are not limited to, EKG and Tens electrode applications, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches.\nFeatures\nStandard electrode ink
Product families
Applications
- Textile Manufacturing
- Medical Devices & Assemblies
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Adhesion, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Medical Electrodes, Membrane Touch Switch, Stamping; Circuit Substrates; Medical Electrodes; Membrane Touch Switch; Stamping
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Shelf LIfe
- 6 months at 25°C.
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
124-36 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner 102-03 and/or 113-12. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for several minutes at 100°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Adhesion
- Good Thermal Stability
- High Hydrolytic Stability
- Radio Frequency Shielding (RFI)
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
2 rows| Characteristic | Value |
|---|---|
| Conductivity | 0.05 |
| Ag/AgCl Ratio | 66:34 |
Table 2 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 17,000 - 23,000 | cps |
| Filler | Silver/ Silver Chloride | — |
| Silver/Silver Chloride Ratio | 66:34:00 | — |
| Volume Resistivity | 0.0002 | Ω - cm |
| Sheet Resistivity | 0.05 | Ω/sq |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 325 | °C |
