Creative Materials 128-40(S)
128-40(S) is a screen-printable high dielectric constant ink, and coating. This product features excellent adhesion to ITO (Indium Tin Oxide) sputtered surfaces, Mylar®, glass and a variety of other surfaces. Unlike conventional materials, this product is very resistant to flexing, and creasing. Some applications for 128- 40(S) include but are not limited to printing of capacitive layers for EL panels and insulation of low voltage circuitry. 128-40(S) features improved scratch resistance compared to similar high dielectric materials.\nFeatures\nChemically resistant high dielectric constant ink
Product families
Applications
- Textile Manufacturing
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Excellent Dielectric Properties, Excellent Substrate Adhesion, Flexing Resistance, Good Scratch Resistance
- Application Area
- Indium Tin Oxide Sputtered Surfaces
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide, Sputtered Surfaces
- Markets
- Industrial
- Printing & Packaging
- Shelf LIfe
2 months at 25°C, 6 months at 5°C, 12 months at -20°C
- Product Type
- Screen Printing Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
128-40(S) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 113-12 or 127-17 thinners. Prior to using, be certain to resuspend filler. Best properties, for most applications, result when cured for 30 minutes 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 110°C to 175°C. This product is not recommended for applications that cannot cure below 110°C.
- Ready to Use Product Features
- Creasing Resistance
- Excellent Dielectric Properties
- Excellent Substrate Adhesion
- Flexing Resistance
- Good Scratch Resistance
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
- Sputtered Surfaces
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 15,000 - 20,000 | cps |
| Dielectric Constant | 40 | — |
| Coverage (1 gram at 1 mil, cm^2) | 85 | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to +225 | °C |
