Creative Materials Inc. 118-08A/B119-44
118-08 is a translucent blue, two component, solvent-resistant, electrically insulating ink, coating and adhesive suitable for screen printing. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 118-08 include, but are not limited to, dielectric insulation of thick film circuitry, improving moisture resistance, arc track resistance, and weathering resistance of electrical/electronic devices.\nFeatures
Product families
Applications
- Textile Manufacturing
- Screen Printing
Product Families
- Screen Printing Inks
Other characteristics
- Features
Arc Resistant, Creasing Resistance, Excellent Substrate Adhesion, Good Moisture Resistance, Good Scratch Resistance, Good Solvent Resistance, Good Weather Stability
- Application Area
- Electrical Components
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Industrial
- Printing & Packaging
- Shelf LIfe
- 12 months at 25°C
- Product Type
- 2K (2 Component) Ink
- Dielectric Paste & Ink
- Screen Printing Ink
- Technology
- Ready-to-Use Products
- Cure Schedule
- Up to 2 weeks (mixed)
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin. Note: It is not unusual for crystallization of the Part B to occur. Warm to 40-45°C in a water bath to return the material to its original viscosity. The crystallization does not affect the performance of the product in any way.
- Mixing Instructions
Premix 118-08 Part A, in original container prior to adding curing agent. Add Part B and mix until uniform. At this point the material may be thinned by adding small amounts of CMI 113-12 thinner.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Arc Resistant
- Creasing Resistance
- Excellent Substrate Adhesion
- Good Moisture Resistance
- Good Scratch Resistance
- Good Solvent Resistance
- Good Weather Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 20000 | cps |
| Volume Resistivity | 1x10^16 | ohm-cm |
| Dielectric Constant (50 Hz) | 4 | — |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 280 | °C |
