Creative Materials 114-34
114-34A/B119-44 is a two component, solvent-resistant, electrically conductive ink, coating and adhesive suitable for screen-printing circuit lines. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 114-34/B119-44 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, bus bars on Indium Tin Oxide sputtered surfaces, and anode coatings for tantalum capacitors. This product is designed for use in crossovers with CMI product 116-20, a UV curable dielectric. 114-34A/B119-44 may be blended with 118-09A/B to provide a wide range of conductivity levels for various applications.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Low Temperature Curing, Radio Frequency Shielding (RFI), Solvent Resistant
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Handling
It is not unusual for crystallization of B119-44 to occur. Warm to 40-45°C in a water bath to return the material to its original viscosity. The crystallization does not affect the performance of the product in any way. To prevent re-crystallization, store the catalyst at temperatures between 35-45°C.
- Shelf LIfe
- 12 months at 25°C
- Product Type
- 2K (2 Component) Ink
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin
- Application Methods
- Screen Coating
- Mixing Instructions
Premix 114-34 Part A, in original container prior to adding curing agent. Add B119-44 and mix until uniform. At this point the material may be thinned by adding small amounts of CMI 113-12 thinner.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Good Adhesion
- Good Scratch Resistance
- High Hydrolytic Stability
- Low Temperature Curing
- Radio Frequency Shielding (RFI)
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | max. 150 | ohms/sq/mil |
| Pot Life | 4 Days | — |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Filler | Carbon | — |
| Volume Resistance | 0.4 | ohm-cm |
| Sheet Resistivity | 150 | ohm/sq./mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 200 | °C |
