Creative Materials 127-06
- Chemical Family
- Epoxy & Epoxy Derivatives
127-06 is a carbon filled, screen-printable, electrically conductive, epoxy based ink and coating suitable for application by screen- printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 127-06 include, but are not limited to, printed potentiometers, printed resistors, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and anode coatings for tantalum capacitors. 127-06 is a 5 kΩ/sq/mil version of 120-24 and features an extended screen life.\nFeatures
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Adhesion, Good Thermal Stability, High Hydrolytic Stability, Long Screen Life, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor, Potentiometers, Resistors; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor; Potentiometers; Resistors
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
6 months at 5°C, 12 months at -10°C, 3 months at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
127-06 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner 102-03. Prior to using, be certain to re-suspend filler. Best properties, for most applications, result when cured for 10 minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 200°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Adhesion
- Good Thermal Stability
- High Hydrolytic Stability
- Long Screen Life
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | max. 5 | Kohms/sq/mil |
| Filler | Carbon | — |
| Sheet Resistivity | max. 5000 | Ω/sq./ mil. |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 325 | °C |
