Creative Materials 120-07(LPS)
- Chemical Family
- Silver & Silver Compounds
120-07(LPS) is a screen-printable, electrically conductive ink, coating and adhesive suitable for application by stamping, screen-printing, dipping and syringe dispensing. This product features excellent adhesion to Kynar, Kapton, Mylar, polycarbonate, glass and can also be used on low surface energy coatings such as transparent conductive oxides. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 120-07(LPS) include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. 120-07(LPS) is a cross-linking version of 120-07(LP) and a more flexible version of 120-07T.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Color
- Silver
- Features
Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
- 2 months at 25˚C, 6 months at -10°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
120-07(LPS) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 124-13. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for a few minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- Good Thermal Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.01 | ohms/sq/mil |
Table 2 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 22,000 - 28,000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 88 | — |
| Volume Resistance | max. 0.000045 | Ω-cm |
| Sheet Resistivity | 0.015 | Ω/sq./mil |
| Hydrolytic Stability | EXcellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
