Creative Materials 125-43C
125-43C is a single component, solvent-resistant, electrically conductive ink, coating and adhesive suitable for screen-printing circuit lines. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 125-43C include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, bus bars on Indium Tin Oxide sputtered surfaces, and anode coatings for tantalum capacitors. This product is designed for use in crossovers with CMI product 116-20, a UV curable dielectric. 125-43C is a lower cost alternative to our 118-09C.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Good Scratch Resistance, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI), Solvent Resistant
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
- 6 months at -40°C, max. 4 days at 25°C
- Cure
- Heat Cure
- Product Type
- 1K (1 component) Ink
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Mixing Instructions
125-43C comes premixed with the appropriate amount of curing agent. It is important to resuspend and settled filler before using. Product may be thinner by adding small amounts of CMI 113-12 thinner.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Good Scratch Resistance
- Good Thermal Stability
- High Hydrolytic Stability
- Radio Frequency Shielding (RFI)
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.2 | ohms/sq/mil |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Percent Filler (cured) | min. 85 | — |
| Volume Resistance | 0.0027 | ohm-cm |
| Sheet Resistivity | 0.2 | ohm/sq./mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | 55 to 200 | ºC |
| Thermal Stability | Good to 200 | °C |
