Creative Materials 112 - 47
112-47 is a carbon-based, electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product is has better thermal stability than 111-26 and features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 112-47 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination. 112-47 can be blended with CMI's 112-48 (20 Ω/square) and 112-15 (0.010 Ω/square) in any ratio to obtain in-between electrical conductivity.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Abrasion Resistant, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Good Adhesion, Good Scratch Resistance, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Heaters, Membrane Touch Switch; Circuit Substrates; Heaters; Membrane Touch Switch
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
112-47 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner #112-19. Prior to use, be certain to mix well to resuspend fillers. Best properties, for most applications, result when cured for 5 minutes at 125°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Abrasion Resistant
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Good Adhesion
- Good Scratch Resistance
- Good Thermal Stability
- High Hydrolytic Stability
- Compatible Substrates and Surfaces
- Glass
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | min. 1M | ohms/sq/mil |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Filler | Carbon | — |
| Volume Resistivity | 63 | Ω - cm |
| Sheet Resistivity | 25000 | Ω/sq |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 325 | °C |
