Creative Materials 112-15A
- Chemical Family
- Silver & Silver Compounds
112-15A is an ink/coating with extremely high electrical conductivity for application by screenprinting, dipping and syringe dispensing. The product features excellent adhesion to Kapton®, Mylar®, glass and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 112–15A include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and coatings for tantalum capacitors. 112-15A is a lower viscosity version of 112-15.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Color
- Silver
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
12 months at -10°C., 6 months at 25°C, 9 months at 5°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
112-15A is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner #112-18, #112-19 and/or #105-36. Prior to use, be certain to mix well to resuspend silver. Best properties, for most applications, result when cured for 3 to 5 minutes at 110°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.01 | ohms/sq/mil |
| Viscosity | 10000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 84 | — |
| Volume Resistance | max. 0.00003 | Ω-cm |
| Sheet Resistivity | 0.01 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
