Creative Materials 126-49(SP)A/B
- Chemical Family
- Silicon-based Compounds
126-49(SP) is a highly elastomeric, electrically conductive, silicone-based medical electrode ink. This product features a high-performance in a wide range of sensing, delivery, and stabilizing applications and features excellent repeatability, stability, and accuracy. This product is highly resistant to flexing and creasing and is ideal for applications that include, but are not limited to: ECG electrodes, TENS electrodes, reference electrodes, and transdermal drug delivery. 126-49(SP) is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.\nFeatures
Product families
Applications
- Transdermal
- Textile Manufacturing
- Medical Devices & Assemblies
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Bondability, Creasing Resistance, Electrically Conductive, Excellent Elasticity, Flexing Resistance, Good Thermal Stability, High Hydrolytic Stability, High Performance, High Temperature Resistance, Long Potlife, Long Screen Life
- Application Area
- Medical Electrodes
- Application Method
- Injection, Screen Coating
- Markets
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Shelf LIfe
- 12 months at 25˚C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin
- Application Methods
- Injection
- Screen Coating
- Mixing Instructions
Premix each part in original containers prior to mixing them together by hand until the combination is uniform.
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
126-49(SP)A/B is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 127-05 or Xylene. Prior to using, be certain to re-suspend silver. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 126-49(SP)A/B is not recommended for applications that cannot cure below 100°C.
- Ready to Use Product Features
- Bondability
- Creasing Resistance
- Electrically Conductive
- Excellent Elasticity
- Flexing Resistance
- Good Thermal Stability
- High Hydrolytic Stability
- High Performance
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.1 | — |
| Ag/AgCl Ratio | 82:18 | — |
| Viscosity | 25000 | cps |
| Filler | Silver/Silver-Chloride | — |
| Percent Silver (cured) | min. 78 | — |
| Specific Gravity (water = 1) | 3.36 | — |
| Volume Resistance | max. 0.00025 | Ω-cm |
| Sheet Resistance | max. 0.1 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -60 to 280 | ºC |
| Thermal Stability | Good to +360 | °C |
