Creative Materials 112-48A
112-48A is an electrically conductive ink/coating for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 112–48A include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 112-48A is a more flexible version of 112-48.\nFeatures\nStandard membrane switch resistive ink
Properties
- Physical Form
- Paste
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Abrasion Resistant, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
- Circuit Substrates, Membrane Touch Switch
- Circuit Substrates
- Membrane Touch Switch
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
- 12 months at -10°C., 6 months at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
112-48A is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner #112-18, #112-19 and/or #105-36. Prior to use, be certain to mix well to resuspend fillers. Best properties, for most applications, result when cured for 3 to 5 minutes at 125°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications
- Ready to Use Product Features
- Abrasion Resistant
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Adhesion
- Good Scratch Resistance
- High Hydrolytic Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | max. 20 | ohms/sq/mil |
| Viscosity | Thick Paste | cps |
| Filler | Carbon | — |
| Volume Resistance | max. 0.05 | Ω-cm |
| Sheet Resistivity | 20 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
