Creative Materials 127-07
- Chemical Family
- Silver & Silver Compounds
127-07 is an ink/coating with high electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines or thinner coatings without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving or enhanced performance. This product is more flexible and elastomeric than traditional conductive inks. Some applications for 127-07 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches and it has shown to have conductivity at up to 200% elongation.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Color
- Silver
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
- 6 months
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Suggested Handling and Curing
127-07 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 113-12. Prior to use, be certain to mix well to re-suspend silver. Best properties for most applications result when cured for 3 to 5 minutes at 175°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- High Hydrolytic Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 18,000- 25,000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 84 | — |
| Volume Resistance | max. 0.00002 | Ω-cm |
| Sheet Resistivity | 0.008 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 120 | ºC |
| Conductivity | 0.008 | ohms/sq/mil |
