Creative Materials 125-09TS
125-09TS is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 125-09TS include, but are not limited to, manufacturing of medical devices and instruments. 125-09TS is a thermosetting version of 125-09T.\nFeatures\nVery abrasion resistant, thermosetting version of 125-09, ideal for urethane
Properties
- Physical Form
- Paste
Product families
Applications
- Textile Manufacturing
- Medical Devices & Assemblies
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Flexing Resistance, Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Radiopaque
- Application Area
- Medical Devices
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Shelf LIfe
max. 4 weeks at 25°C, 12 months at -40°C., 6 months at -10°C
- Cure
- Heat Cure
- Product Type
- Radio Opaque Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
125-09TS is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinners 102-03, and/or 113-12. Prior to use, be certain to mix well to re-suspend filler. Best properties, for most applications, result when cured several minutes at 170°C to 180°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Flexing Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- High Hydrolytic Stability
- Radiopaque
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | Paste | cps |
| Percent Filler (cured) | min. 95 | — |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
