Creative Materials 126-33
- Chemical Family
- Silver & Silver Compounds
126-33 is an ink/coating with extremely high electrical conductivity for application by screenprinting, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines or thinner coatings without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving or enhanced performance. Unlike conventional conductive materials, this product is resistant to aggressive solvents such as MEK and acetone. Some applications for 126-33 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Color
- Silver
- Features
Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Excellent Solvent Resistance, Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
126-33 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03 or Isophorone. Prior to use, be certain to mix well to re-suspend silver. Best properties for most applications result when cured for 3 to 5 minutes at 175°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Excellent Solvent Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- Good Thermal Stability
- Compatible Substrates and Surfaces
- Plastics
- Polyimide
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 0.008 | ohms/sq/mil |
| Viscosity | 35000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 84 | — |
| Volume Resistance | max. 0.00002 | Ω-cm |
| Sheet Resistivity | 0.008 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | 55 to 200 | ºC |
