Creative Materials 126-35
126-35 is an ink/coating with very high coverage and good electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Mylar, glass and a variety of other substrates. The proper use of this ink can result in a significant cost saving. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 126-35 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 126-35 can be blended with 125-15 (0.01 ohm/sq/mil version) or 112- 47 (25,000 ohm/sq/mil version) to obtain a range of conductivities.
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Abrasion Resistant, Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Adhesion, Good Scratch Resistance, High Coverage, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
- Circuit Substrates, Membrane Touch Switch, RFID
- Circuit Substrates
- Membrane Touch Switch
- RFID
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
6 months at 5°C, 12 months at -10°C., 3 months at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
126-35 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 112-19 or 113-12. Prior to use, be certain to mix well to re-suspend silver. Best properties for most applications result when cured for 5 minutes at 120°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Abrasion Resistant
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Adhesion
- Good Scratch Resistance
- Compatible Substrates and Surfaces
- Glass
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | 1 | ohms/sq/mil |
| Viscosity | 25,000 - 35,000 | cps |
| Volume Resistance | max. 0.0025 | Ω-cm |
| Sheet Resistance | max. 1 | Ω/sq/mil |
| Coverage (1 gram at 0.5 mils wet in2) | min. 80 | — |
| Pencil Hardness | min. 2H | — |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 2000 | ºC |
