Creative Materials 126-09
126-09 is an electrically conductive ink/coating for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. This product is very resistant to abrasion, scratching, flexing and creasing and is suitable for applications requiring significant flexing cycles with minimal effect on electrical performance. Some applications for 126-09 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and coatings for tantalum capacitors.\nFeatures
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Excellent Humidity Resistance, Flexing Resistance, Good Abrasion Resistance, Good Scratch Resistance, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor, RFID; Circuit Substrates; Membrane Touch Switch; Polymer Tantalum Capacitor; RFID
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
6 months at 5°C, 12 months at -10°C, 3 months at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
126-09 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner #112-19, NMP, or EB Acetate. Prior to use, be certain to mix well to resuspend silver. Best properties for most applications result when cured for 5 minutes at 120°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Excellent Humidity Resistance
- Flexing Resistance
- Good Abrasion Resistance
- Good Scratch Resistance
- Compatible Substrates and Surfaces
- Plastics
- Polyimide
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 15,000 - 25,000 | cps |
| Humidity Resistance | Excellent | — |
| Volume Resistance | max. 0.00013 | Ω-cm |
| Sheet Resistance | max. 0.05 | Ω/square/mil |
| Useful Temperature Range | -55 to 200 | ºC |
| Conductivity | 0.05 | ohms/sq/mil |
