Creative Materials Inc. 128-07
128-07 is an ink/coating with high electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The proper use of this feature can result in a significant cost saving or enhanced performance. This product is more flexible and elastomeric than traditional conductive inks. Some applications for 128-07 include, but are not limited to, RFID antennae, polymer thick film circuitry, and membrane switches and it has shown to have conductivity at over 50% elongation. 128-07 is a carbon version of 127-07.\nFeatures
Product families
Applications
- Textile Manufacturing
- Switches & Relays
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Cost Effective, Crease Resistance, Electrically Conductive, Flexible, Good Adhesion, High Hydrolytic Stability
- Application Area
- Circuit Substrates, Membrane Touch Switch, RFID
- Circuit Substrates
- Membrane Touch Switch
- RFID
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
12 months at -10°C., 6 months at 25°C, 9 months at -5°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.; Xylene works especially well as a cleanup solvent
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
128-07 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03 or 127-17. Prior to use, be certain to mix well to re-suspend filler. Best properties for most applications result when cured for 5 to 10 minutes at 175°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Cost Effective
- Crease Resistance
- Electrically Conductive
- Flexible
- Good Adhesion
- High Hydrolytic Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Conductivity | max. 30 | ohms/sq/mil |
| Viscosity | 30,000 - 35,000 | cps |
| Filler | Carbon | — |
| Crease Resistance | 0.075 | — |
| Sheet Resistivity | 30 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 120 | ºC |
