Creative Materials 113-15
113-15 is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 113–15 include, but are not limited to, manufacturing of medical devices and instruments.\nFeatures\nLow temperature curing, flexible & highly filled, ideal for polyester
Properties
- Physical Form
- Paste
Product families
Applications
- Textile Manufacturing
- Medical Devices & Assemblies
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Flexible, Flexing Resistance, Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Low Temperature Curing, Radiopaque
- Application Area
- Medical Devices
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Shelf LIfe
2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Cure
- Heat Cure
- Product Type
- Radio Opaque Ink
- Technology
- Ready-to-Use Products
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
113-15 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner #112-18, #112-19 and/or #105-36. Prior to use, be certain to mix well to resuspend filler. Best properties, for most applications, result when cured for 3 to 5 minutes at 110°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Flexible
- Flexing Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Scratch Resistance
- High Hydrolytic Stability
- Low Temperature Curing
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | Paste | cps |
| Percent Filler (cured) | min. 95 | — |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
