Creative Materials 126-03(SP)C
- Chemical Family
- Silicon-based Compounds
126-03(SP)C is a highly elastomeric, electrically conductive, silicone-based ink. This product features a highperformance design useful in a wide range of printing and coating applications and features excellent bonding to most metal and plastic substrates. This product is very resistant to flexing and creasing and is ideal for applications that include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, sealing of electronic casings. 126-03(SP)C is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.\nFeatures
Product families
Applications
- Textile Manufacturing
- Housings & Enclosures
- Screen Printing
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Bondability, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexible, Flexing Resistance, Good Thermal Stability, High Hydrolytic Stability, High Temperature Performance, High Temperature Resistance, Long Potlife, Radio Frequency Shielding (RFI)
- Application Area
- Circuit Substrates
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Metal
- Markets
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Shelf LIfe
6 months at 5°C, 12 months at -10°C, Up to 2 weeks at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Safety and Handling
Contains flammable solvents.; Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
126-03(SP)C is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI 127-05 or Xylene. Prior to using, be certain to re-suspend any settled filler. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 126-03(SP)C is not recommended for applications that cannot cure below 150°C.
- Ready to Use Product Features
- Bondability
- Crease Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexible
- Flexing Resistance
- Good Thermal Stability
- High Hydrolytic Stability
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 40000 | cps |
| Filler | Carbon | — |
| Specific Gravity (water = 1) | 1.05 | — |
| Volume Resistance | max. 0.65 | Ω-cm |
| Sheet Resistance | max. 250 | Ω/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -60 to 180 | ºC |
| Thermal Stability | Good to +200 | °C |
| Conductivity | max. 250 | ohms/sq/mil |
