Creative Materials 126-26/B-507
126-26 is a screen-printable, non-tacky, silicone dielectric coating and adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. 126-26 is designed for bonding rubber to a variety of substrates such as aluminum, stainless steel, and steel. Peel strength develops rapidly and continues to increase for approximately 1 week. 126- 26 is designed to be non-tacky on cure.\nFeatures\nNon-Flammable Silicone dielectric ink and coating.
Product families
- Other Adhesives & Sealants
Other characteristics
- Product Type
- Coating, Insulating Coating
- Coating
- Insulating Coating
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Aluminum, Metal, Stainless Steel, Steel
- Shelf Life
2 months at 25°C, 6 months at 5°C, 9 months at -20°C
- Technology
- Ready-to-Use Products
- Safety and Handling
Contains flammable solvents.; Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Suggested Handling and Curing
126-26 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of 127-05 thinner. Apply thin film of material to both surfaces to be bonded. Dry at room temperature for approximately 10 to 20 minutes. At this point, the surfaces should be pressed firmly together. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. Alternately, the assembled part can be cured at room temperature, allowing 1 week to develop full strength. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Flexing Resistance
- Good Peeling Strength
- High Cohesion
- High Hydrolytic Stability
- Highly Versatile
- Improved Shear Stability
- Non-tacky surface
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Stainless Steel
- Steel
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 30,000 - 40,000 | cps |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to +325 | °C |
| Peel Strength | 9 - 11 | lbs./inch |
