Creative Materials 119-31TS
119-31TS is an extremely flexible, pad printable radio opaque ink and coating for application by pad printing and syringe dispensing. The product features excellent adhesion to PEBAX, Kapton, Mylar, glass and a variety of other substrates. Unlike conventional materials this product offers a balance of properties featuring excellent toughness high flexing, crease, and abrasion resistance as well as the ability to elongate and stretch. These properties make 119-31TS well suited for applications including, but not limited to, manufacturing of markers for medical devices and fluoroscopy as well as shielding for security applications. 119-31TS is a more chemically resistant version of 119-31T.\nFeatures
Product families
Applications
- Medical Devices & Assemblies
Product Families
- Security Inks
Other characteristics
- Features
Chemical Resistant, Creasing Resistance, Excellent Toughness, Flexing Resistance, Good Abrasion Resistance, Good Adhesion, Good Elongation, Good Stretchability, Good Thermal Stability, Highly Flexible, Low Temperature Curing, Radiopaque
- Application Area
- Medical Devices
- Application Method
- Injection, Pad Printing
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Healthcare & Pharma
- Shelf LIfe
max. 4 weeks at 25°C, 12 months at -40°C, 6 months at -20°C
- Cure
- Heat Cure
- Product Type
- Radio Opaque Ink
- Security Ink
- Technology
- Ready-to-Use Products
- Suggested Curing
Best properties, for most applications, result when cured following one of the below cure schedules but good results can be attained with temperatures between 110° and 200°C. End user is advised to experimentally determine temperature and time best suited for individual applications though higher temperatures are recommended for difficult to stick to substrates.
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Injection
- Pad Printing
- Suggested Handling
119-31TS is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinners 113-39 or 127-32R2. Prior to use, be certain to mix well to resuspend filler.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Chemical Resistant
- Creasing Resistance
- Excellent Toughness
- Flexing Resistance
- Good Abrasion Resistance
- Good Adhesion
- Good Elongation
- Good Stretchability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 11000 | cps |
| Percent Filler (cured) | min. 95 | — |
| Density (Cured) | 12.05 | g/cc |
| Crosshatch Adhesion (PEBAX) | 5B | — |
| Pencil Hardness | F | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to +250 | °C |
