Creative Materials 102-32RT
- Chemical Family
- Silicones
102-32RT is a flexible, reworkable, electrically conductive, silicone pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32RT include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32RT is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces. 102-32RT features better conductivity than 102-32 when cured at lower temperatures.
Properties
- Physical Form
- Paste
Product families
- Conductive Adhesives
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Product Type
- Conductive Adhesive
- Application Method
- Injection
- Storage
- Shelf life
- 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
- NOTE
- Use catalyzed product within 24 - 36 hours.
- * 102-32RT packaged in syringes must be kept frozen at -10°C
- Shelf LIfe
12 months at -10°C, 6 months at 25°C, 9 months at 5°C
- Technology
- Ready-to-Use Products
- Safety and Handling
Contains flammable solvents.; Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Injection
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
102-32RT is ready to use as supplied. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05. Prior to using, be certain to resuspend silver. Apply thin film of adhesive to both surfaces to be bonded. Heat for 5 to 10 minutes at 100°C and assemble while still warm. Apply slight pressure to assure good mating of surfaces and formation of filet. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Flexible
- Flexing Resistance
- Good Peeling Strength
- High Temperature Performance
- Low Modulus
Technical data
Table 1 of 2
2 rows| Characteristic | Value |
|---|---|
| Pot Life | Latent |
| Conductivity | 0.003 |
Table 2 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Filler | Silver | — |
| Percent Silver (cured) | 78 | — |
| Volume Resistance (at 75°C cure) | max. 0.003 | Ω-cm |
| Sheet Resistance (at 75°C cure) | max. 1 | Ω/sq/mil |
| Thermal Conductivity | 12.29 | W/m-K |
| Thermal Conductivity | 7.1 | Btu ft/ft2 -hr-°F |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
