Creative Materials 124-33(S)
124-33(S) is a solvent resistant flexible electrically conductive adhesive. This product features excellent adhesion to Kapton®, Mylar®, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 124-33(S) include, but are not limited to, electrical attachments for surface mounted devices and heat-sealing openings in emi/rfi enclosures. 124-33(S) is a thermosetting version of 124-33 that is chemical and age resistant.\nFeatures\nExtremely flexible conductive adhesive
Product families
- Conductive Adhesives
Other characteristics
- Product Type
- Conductive Adhesive
- Application Area
- Electrical Components
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Plastics, Polyimide
- Shelf Life
2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
124-33(S) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03. Prior to using, be certain to re-suspend silver. Best properties, for most applications, result when dried several minutes at 85°C followed by curing for 5-10 minutes at 175°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 110°C to 175°C. Not recommended for applications that cannot cure above 110°C. When used as a sealant, apply adhesive to surfaces to be bonded and dry for several minutes at 85°C, then place substrates together while heating and applying slight pressure and cure.
- Ready to Use Product Features
- Chemical Resistant
- Creasing Resistance
- Electrically Conductive
- Excellent Substrate Adhesion
- Flexible
- Flexing Resistance
- Improved Ageing Resistance
- Low Modulus
- Compatible Substrates and Surfaces
- Plastics
- Polyimide
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Pot Life | Latent | — |
| Conductivity | 0.0005 | — |
| Viscosity (HAT, #TA at 10 rpm) | 18,000 - 22,000 | cps |
| Filler | Silver | — |
| Volume Resistance | 0.0005 | Ω-cm |
| Sheet Resistivity | 0.2 | Ω/sq./mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 120 | ºC |
| Thermal Stability | Good to 200 | °C |
