Creative Materials Inc. 114-14A
114-14A is a screen-printable high dielectric constant ink, and coating. This product features excellent adhesion to ITO (Indium Tin Oxide) sputtered surfaces, Kapton®, Mylar®, glass and a variety of other surfaces. Unlike conventional materials, this product is very resistant to flexing, and creasing.\nFeatures\nHigh dielectric constant epoxy ink for capacitive layers
Properties
- Physical Form
- Paste
Product families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Excellent Dielectric Properties, Excellent Substrate Adhesion, Flexing Resistance
- Application Area
- Indium Tin Oxide Sputtered Surfaces
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide, Sputtered Surfaces
- Shelf Life
12 months at - 10°C, 3 months at 25°C, 4 months at 5°C
- Product Type
- Dielectric Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen-print
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
114-14A is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI #113-12 thinner. Prior to using, be certain to resupspend filler. Best properties, for most applications, result when cured for 1 Hour 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 150°C. NOTE: Add 1phr B-187 catalyst when using low temperature cures. The use of B-187 is suggested to impart a high degree of chemical resistance. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Excellent Dielectric Properties
- Excellent Substrate Adhesion
- Flexing Resistance
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
- Sputtered Surfaces
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Dielectric Constant | 40 | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 325 | °C |
