Creative Materials 119-10
- Chemical Family
- Silver & Silver Compounds
119-10 is a pad printable, electrically conductive, medical grade ink, and coating, suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 119-10 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors as well as medical electrode applications. 119-10 is a pad-printable version of 108-38.\nFeatures
Product families
Applications
- Medical Devices & Assemblies
- Switches & Relays
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Flexing Resistance, Good Adhesion, Good Thermal Stability, High Hydrolytic Stability, Radio Frequency Shielding (RFI)
- Application Area
Circuit Substrates, Electrical Components, Medical Electrodes, Membrane Touch Switch, Polymer Tantalum Capacitor; Circuit Substrates; Electrical Components; Medical Electrodes; Membrane Touch Switch; Polymer Tantalum Capacitor
- Application Method
- Dip Coating, Injection, Pad Printing
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Healthcare & Pharma
- Shelf LIfe
- 12 months at -10°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Pad Printing
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
119-10 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinners #113-39, 114-20, or 114-28. Prior to using, be certain to resuspend filler. Best properties, for most applications, result when cured for 20 minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- Flexing Resistance
- Good Adhesion
- Good Thermal Stability
- High Hydrolytic Stability
- Radio Frequency Shielding (RFI)
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
2 rows| Characteristic | Value |
|---|---|
| Ag/AgCl Ratio | 95:5 |
| Conductivity | 0.05 |
Table 2 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Filler | Silver/ Silver Chloride | — |
| Percent Filler (cured) | min. 75 | — |
| Volume Resistivity | 0.00013 | ohm-cm |
| Sheet Resistivity | 0.05 | ohm/sq. |
| Glass Transition Temperature | 75 | °C |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
| Thermal Stability | Good to 325 | °C |
