Creative Materials 102-32NFC
- Chemical Family
- Silicones
102-32NFC is a flexible electrically conductive silicone adhesive. 102-32NFC features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of the product. Some applications for 102-32NFC include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32NFC is one of the few conductive adhesives that can bond to silicone substrates and surfaces. 102-32NFC is a non-flammable version of 102-32.\nFeatures
Product families
- Conductive Adhesives
Other characteristics
- Product Type
- Conductive Adhesive
- Application Area
- Electrical Components
- Application Method
- Injection
- Storage
Shelf life: up to 2 weeks at 25°C; or 6 months at 5°C; or 12 months at -20°C. See syringe handling guidelines for recommendations on storage and maintaining homogeneity of material over long-term storage. *102-32NFC packaged in syringes must be kept frozen at -40°C
- Shelf LIfe
6 months at 5°C, 12 months at -20°C, 2 weeks at 25°C
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Injection
- Suggested Handling
Before using 102-32NFC should be stirred gently to ensure homogeneity. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05.
- Curing and Bonding
Apply thin film of adhesive to both surfaces to be bonded. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 102-32NFC is not recommended for applications that cannot cure above 100°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Ready to Use Product Features
- Electrically Conductive
- Flexible
- Good Mechanical Properties
- Good Thermal Stability
- Heat Resistance
- Low Modulus
- Medium Modulus
- Shock Resistant
Technical data
Table 1 of 2
2 rows| Characteristic | Value |
|---|---|
| Pot Life | Latent |
| Conductivity | 0.0001 |
Table 2 of 2
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 30000 | cps |
| Filler | Silver | — |
| Percent Silver (cured) | min. 78 | — |
| Volume Resistance | max. 0.0001 | Ω-cm |
| Thermal Conductivity | 5.4 | W/m-K |
| Young's Modulus | 1700 | MPa |
| Tensile Strength | 5 | Mpa |
| Hardness | 55 | Shore A |
| Rear Strength | 12500 | N/m |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
