Creative Materials Inc. 127-48D
127-48D is a matte finish, flexible, electrically insulating ink and coating suitable for application by screen printing, dipping, and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, polycarbonate, glass, and a variety of other surfaces. Unlike conventional insulating materials, this product is very resistant to flexing and creasing. Some applications for 127-48D include, but are not limited to, insulating polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 127-48D is a thermosetting version of 124- 18T.\nFeatures\nSolvent resistant washable dielectric ink ideal for fabrics
Product families
- Functional Inks & Pastes
Other characteristics
- Features
Anisotropic, Creasing Resistance, Electrically Insulating, Excellent Substrate Adhesion, Flexible, Flexing Resistance, Low Thermal Expansion, Matte Finish
- Application Area
Electrical Components, PTF Circuits, Ribbon Cables; Electrical Components; PTF Circuits; Ribbon Cables
- Application Method
- Dip Coating, Injection, Screen Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Shelf LIfe
- 6 months at 21°C
- Product Type
- Dielectric Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Screen Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
127-48D is ready to use as supplied. Stir gently before using. Further thinning may be accomplished by adding small amounts of thinner 120-08. Best properties for most applications result when cured for one hour at 125°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Anisotropic
- Creasing Resistance
- Electrically Insulating
- Excellent Substrate Adhesion
- Flexible
- Flexing Resistance
- Low Thermal Expansion
- Matte Finish
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 15,000 - 20,000 | cps |
| Volume Resistivity | 1x 10^11 | ohm-cm |
| Tear Resistance | min. 300 | lbs/in. |
| Glass Transition Temperature | 26 | °C |
