Creative Materials 127-11
- Chemical Family
- Silver & Silver Compounds
127-11 is a medical electrode ink and coating suitable for application by wire coating, dipping and flexographic or gravure printing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike most readily available electrode inks, this product is able to maintain conductivity levels in contact with high salt content electrode adhesive gel. This product is designed to produce uniform smooth surfaces in thin layers and to be fast curing at low temperatures. Some uses for 127-11 include, but are not limited to, EKG and Tens electrode applications as well as other medical devices.\nFeatures
Product families
Applications
- Medical Devices & Assemblies
- Flexography
- Gravure Printing
- Building Wires & Power Cables
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Electrically Conductive, Fast Curing, Good Adhesion, Good Smoothness, High Hydrolytic Stability, Low Temperature Curing
- Application Area
- Medical Devices, Medical Electrodes, Wire Cables
- Medical Devices
- Medical Electrodes
- Wire Cables
- Application Method
- Flexography, Gravure Coating
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Electrical & Electronics
- Healthcare & Pharma
- Printing & Packaging
- Shelf LIfe
- 6 months at 21°C.
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Flexography
- Gravure Coating
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
127-11 is ready to use as supplied. Be sure to resuspend filler before use. Dilution or modification of drying rate may be accomplished by adding small amounts of Methyl Ethyl Ketone (fast drying) or Methyl Isobutyl Ketone (slow drying). Good properties, for most applications, result when cured for less than 1 minute at 75°C. Best properties are obtained by curing at temperatures greater than 100°C. End user is advised to experimentally determine temperature and time best suited for individual applications. Ensure containers are stored in light-block or opaque containers. Never store in clear or metal containers. Avoid direct exposure to sunlight, UV light, and heat sources as silver chloride can discolor or agglomerate. Avoid using metal scrapers, spatulas, and tools as the silver chloride can react and potentially damage any metallic equipment. Plastic, wood, or glass are recommended. Silver chloride inks are safe to use on high grade stainless steel, nickel, and polymer screens, plates, clichés, and other equipment but care should be taken to avoid exposure to other metal surfaces.
- Ready to Use Product Features
- Creasing Resistance
- Electrically Conductive
- Fast Curing
- Good Adhesion
- Good Smoothness
- High Hydrolytic Stability
- Low Temperature Curing
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
2 rows| Characteristic | Value |
|---|---|
| Ag/AgCl Ratio | 95:5 |
| Conductivity | 0.05 |
Table 2 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 400 - 800 | cps |
| Filler | Silver/ Silver Chloride | — |
| Silver/Silver Chloride Ratio | 95:5 | — |
| Volume Resistivity | 0.0002 | Ω - cm |
| Sheet Resistivity | 0.05 | Ω/sq./mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
