Creative Materials 122-44(SP)C
- Chemical Family
- Silicones
122-44(SP)C is a flexible anisotropic conductive silicone adhesive. features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of the product. This product is very resistant to flexing and creasing. 122-44(SP)C is designed for bonding rubber to a variety of substrates such as aluminum, stainless steel, and steel. Additionally, 122-44(SP)C is one of the few conductive adhesives that can bond to silicone substrates and surfaces.122-44(SP)C is a non-flammable version of 122-44.\nFeatures
Properties
- Physical Form
- Liquid
Product families
- Conductive Adhesives
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Product Type
- Conductive Adhesive, Pressure Sensitive Adhesive
- Conductive Adhesive
- Pressure Sensitive Adhesive
- Application Method
- Screen Coating
- Compatible Substrates & Surfaces
- Aluminum, Metal, Stainless Steel, Steel
- Storage
Shelf life: up to 2 weeks at 25°C; or 6 months at -20°C. See syringe handling guidelines for recommendations on storage and maintaining homogeneity of material over long-term storage. *122-44(SP)C packaged in syringes must be kept frozen at -40°C
- Shelf LIfe
- 6 months at -20°C, Up to 2 weeks at 25°C
- Consistency
- Medium viscosity liquid
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Safety and Handling
Contains flammable solvents.; Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Screen Coating
- Suggested Handling
Before using 122-44(SP)C should be stirred gently to ensure homogeneity. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05.
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
Apply thin film of adhesive to both surfaces to be bonded. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 122-44(SP)C is not recommended for applications that cannot cure above 100°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Anisotropic
- Creasing Resistance
- Excellent Substrate Adhesion
- Flexible
- Flexing Resistance
- Heat Resistance
- Shock Resistant
- Vibration Damping
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Stainless Steel
- Steel
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Minimum Cure Temperature | 100 | °C |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Resistivity (X and Y Axis) | 1x10^12 | Ω - cm |
| Volume Resistivity (Z Axis) | 0.0001 | Ω - cm |
| Hydrolytic Stability | Excellent | — |
| Hardness | -50 | Shore A |
| Useful Temperature Range | -70 to 260 | ºC |
| Thermal Stability | Good to 325 | °C |
