Creative Materials 128-06(PP)
- Chemical Family
- Silver & Silver Compounds
128-06(PP) is a pad printable, electrically conductive, medical grade ink, and coating, suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing in both mechanical and electrical stability. Some applications for 128- 06(PP) include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 128-06(PP) is a pad printable version of 113-09T.\nFeatures
Product families
Applications
- Transdermal
- Medical Devices & Assemblies
Product Families
- Functional Inks & Pastes
Other characteristics
- Features
Creasing Resistance, Electrical Resistance, Electrically Conductive, Flexing Resistance, Good Adhesion, High Hydrolytic Stability, Mechanical Stability
- Application Area
- Medical Electrodes
- Application Method
- Dip Coating, Injection, Pad Printing
- Compatible Substrates & Surfaces
- Glass, Plastics, Polyimide
- Markets
- Healthcare & Pharma
- Shelf LIfe
- 12 months at -10°C, 6 months at 25°C
- Cure
- Heat Cure
- Product Type
- Conductive Paste & Ink
- Technology
- Ready-to-Use Products
- Safety and Handling
Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin.
- Application Methods
- Dip Coating
- Injection
- Pad Printing
- Certifications and Compliance
- ISO 9001
- Suggested Handling and Curing
128-06(PP) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinners 127-32 (fast) and 127-32R2 (slow). Prior to using, be certain to resuspend filler. Best properties, for most applications, result when cured for 5 minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Ready to Use Product Features
- Creasing Resistance
- Electrical Resistance
- Electrically Conductive
- Flexing Resistance
- Good Adhesion
- High Hydrolytic Stability
- Mechanical Stability
- Compatible Substrates and Surfaces
- Glass
- Plastics
- Polyimide
Technical data
Table 1 of 2
2 rows| Characteristic | Value |
|---|---|
| Ag/AgCl Ratio | 82:18:00 |
| Conductivity | 0.05 |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 6,000 - 8,000 | cps |
| Filler | Silver/silver chloride | — |
| Volume Resistivity | 0.0002 | ohm-cm |
| Sheet Resistivity | 0.05 | ohm/sq/mil |
| Hydrolytic Stability | Excellent | — |
| Useful Temperature Range | -55 to 200 | ºC |
