Creative Materials 124-24

Chemical Family: Acrylics & Acrylates

124-24 is a screen-printable, anisotropic, UV cured adhesive. This product can be used on a variety of substrates such as polycarbonate, treated and untreated polyesters, Kapton, epoxy/glass PC boards and glass.\nFeatures\nUV curable flexible adhesive

Properties

Physical Form: Paste

Product families

Ready-to-Use Products — Adhesives & Sealants

Conductive Adhesives

Other characteristics

Cure Method: Radiation Cure
Product Type: Conductive Adhesive
Application Method: Screen Coating
Compatible Substrates & Surfaces: Glass, Plastics, Polyimide
Shelf Life: 6 months at 5°C, 3 months at 25°
Cure: Radiation Cure
Technology: Ready-to-Use Products
Safety and Handling: Use with adequate ventilation.; Keep away from sparks and open flames.; Avoid prolonged contact with skin and breathing of vapors.; Wash with soap and water to remove from skin
Application Methods: Screen Coating
Certifications and Compliance: ISO 9001
Suggested Handling and Curing: Material is ready to use as received. Cure using a 200-300 watt/inch mercury vapor lamp. Speed of cure will vary depending upon available energy. Typical cure time ranges from a few seconds to 1 minute when work is positioned 6-10 inches from lamp. Faster curing can be accomplished by moving lamp closer to work or increasing lamp intensity. When applying two layers, it is sometimes desirable to under-cure the first layer so as to improve interlayer adhesion. NOTE: Direct exposure to UV light source is required for material to cure properly.
Ready to Use Product Features: Anisotropic
Flexible
UV Curable
Compatible Substrates and Surfaces: Glass
Plastics
Polyimide

Technical data

Table 1 of 2

1 row

Characteristic	Value
Minimum Cure Temperature	UV

Table 2 of 2

5 rows

Characteristic	Value	Unit
Volume Resistivity (X and Y Axis)	1x 10^12	Ω - cm
Volume Resistivity (Z Axis)	0.0001	Ω - cm
Hydrolytic Stability	Excellent	—
Useful Temperature Range	-55 to 140	ºC
Thermal Stability	Good to 220	°C