Hauthane HD-2142 DMM (L-2942)
- CASE Ingredients Features
- Chemical ResistanceHumidity ResistanceStain ResistanceUV Resistance
- Chemical Family
- Polyurethanes (PU)
Hauthane HD-2142 DMM (L-2942) is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. Features: Superior adhesion to PVC and treated polypropylene film. Excellent UV resistance. Exceptional alcohol resistance. Humidity resistance. Contains dipropylene glycol dimethyl ether (DMM) co-solvent.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Consumer Goods — Furniture
- Interior
- Shingles & Tiles
- Consumer Electronics
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- Features
Chemical Resistance, Humidity Resistance, Stain Resistance, UV Resistance
- Compatible Substrates & Surfaces
- Plastics
- Drying
The addition of coalescing solvent is recommended to achieve optimal film formation with HD-2142 DMM.; In ambient-cured systems the addition of 5-10% DPnB coalescing solvent is suggested.; Less coalescing solvent is required in heat-cured systems to attain comparable film properties.; Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Carrier
- Water
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Product Uses
HD-2142 DMM was developed for use on flexible and rigid PVC, and treated polypropylene film.; Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films.; Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components.
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- NMP-free
- Application Methods
- Air Knife Coating
- Spray
- Applications
HD-2142 DMM may be used as a sole vehicle or blended with acrylic emulsions.. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods.
- Compatible Polymers and Resins
- Acrylics
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 34 - 36 | % |
| Viscosity | 50 - 1000 | cps |
| pH | 7.5 - 10.0 | — |
| Density | 1.05 | lbs/gal |
| VOC Content | 91 | gm/l |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 185 | % | Tested at 2 inches/minute |
| Tensile Strength | 31 MPa | MPa | Tested at 2 inches/minute |
| 100% Modulus | 24 | MPa | Tested at 2 inches/minute |
