Hauthane L-3838
- CASE Ingredients Features
- Chemical ResistanceExcellent AdhesionGood Gloss RetentionImproved FlexibilityRoom Temperature CuringUV Resistance
- Chemical Family
- Polyurethanes (PU)
Hauthane L-3838 is a hard, pre-coalesced, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, water-borne polyurethane dispersion. Features: Partially pre-coalesced. Excellent UV resistance. Exceptional alcohol resistance. Superior adhesion to PVC.. Contains dipropylene glycol dimethyl ether (DMM), dipropylene glycol methyl ether (DPM), diethylene glycol monobutyl (DB) co-solvent blend.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Concrete Coatings & Stains
- Wood Coatings & Finishes
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- End Uses
- Top Coat
- Features
Chemical Resistance, Excellent Adhesion, Good Gloss Retention, Improved Flexibility, Room Temperature Curing, UV Resistance
- Compatible Substrates & Surfaces
- Concrete, Metal, Plastics, Wood
- Drying
L-3838 may be dried at ambient temperatures. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Carrier
- Water
- Markets
- Paints & Coatings
- Coating Type
- Top Coat
- Product Uses
L-3838 was developed for use on flexible and rigid PVC and other plastic substrates.; It may also be formulated to provide gloss topcoats on cementatious, metal and wood substrates.; This product exhibits superior chemical resistance properties, while maintaining excellent flexibility and gloss retention characteristics.
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- NMP-free
- Application Methods
- Brush
- Knife-over-roll
- Spray
- Applications
L-3838 may be used as a sole vehicle or blended with acrylic emulsions for spray or brush applications.. Rheology modifications can be made with associative thickeners for alternative application methods.
- Compatible Polymers and Resins
- Acrylics
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Plastics
- Wood
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 34 - 36 | % |
| Viscosity | 50 - 500 | cps |
| pH | 7.5 - 10.0 | — |
| Density | 8.8 | lbs/gal |
| Softening Point | 365 | °F |
| VOC Content | 127 | gm/l |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 165 | % | Tested at 2 inches/minute |
| Tensile Strength | 6900 | psi | Tested at 2 inches/minute |
| 100% Modulus | 5700 | psi | Tested at 2 inches/minute |
